How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (2023)

All Products

Mildew Stain Remover

Hull Care

(Video) How to polish aluminum wheels and what products I use

Boat Care Kits

Home / How to Polish RV Metal

How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (1)

How to Polish Metal

Polish metal to a mirror shine! Here are our top tips and techniques to polish metal, including chrome, aluminum, and stainless steel. We’ve included some of the best metal polish and metal cleaner recommendations, all tested and approved by our staff. There’s nothing like the gleam of just-polished metal and we’ll tell you how to get it.

AluminumHow to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (2)

Aluminum is a relatively soft metal and its one of the easier metals to polish and get a bright shine. Aluminum, usually an aluminum alloy, is used to make wheels, trailers – including the vintage Air Stream trailers, diamond plate, engine components, and so on.

For all its great qualities, aluminum oxidizes very easily. It’s actually a defense mechanism of the metal: a light layer of aluminum oxide protects the underlying metal from corrosion. This aluminum oxide is functional but its not attractive, and that’s why factory-polished aluminum is usually coated. (In this case, you need a metal polish that is safe on coatings, unless you plan to remove the coating. For stripping the coating, consult a professional.)

How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (3)
Wolfgang MetallWerk™ Aluminum Polishesare formulated just for aluminum and other uncoated metals.

If your aluminum is uncoated, you’re ready to get started with an aluminum polish. Wolfgang MetallWerk™ Aluminum Polishes are formulated just for aluminum and other uncoated metals. They are incredibly effective at removing oxidation, tarnish, stains, and water spots. The Wolfgang metal polishes are a complete four-step system but you may not need all four steps, depending on the condition of your aluminum surfaces. The techniques here will work on any bare metals.

First, there’s Wolfgang MetallWerk™ Aluminum Compound. If you have aluminum wheels or a trailer that has never been polished, ever, this is where you need to start. This is an aggressive prepolish that removes the oxidation and cleans the aluminum surface. It leaves a clean and somewhat shiny surface. The follow-up polishes are what really turn up the gloss.

To apply Wolfgang MetallWerk™ Aluminum Compound to a large surface, like a trailer, use a Wolfgang MetallWerk™ 4 Ply 100% Twisted Wool Compounding Pad. The twisted wool strands give the pad the cutting power necessary to eliminate years of oxidation. Wipe the compound onto the surface with an applicator pad first to avoid sling. Work at a speed of 1200-1500 RPM (5-6 on your dual action polisher). Polish until oxidation and stains have disappeared. Wool pads are made to lint so wear proper eye protection and old clothes. Buff the aluminum with a towel. Polishing aluminum is a messy process so have plenty of towels on hand.

Once you’ve used the prepolish, use Wolfgang MetallWerk™ Fine Aluminum Polish to enhance the shine. If the aluminum is only lightly oxidized, this may be your first step. Wolfgang MetallWerk™ Fine Aluminum Polish is a fine grade polish that continues to clean the metal but its main function is to burnish it to a glossy shine. Follow the same directions as above but use a 50/50 Wool Acrylic Pad on your polisher. (If you’re going to use the Mothers PowerBall Mini or Flitz Polishing Ball, use a clean one.)

The aluminum should have a brilliant shine at this point. This next step is really for perfectionists, collectors, and car show enthusiasts. Wolfgang MetallWerk™ Concours Aluminum Polish is a very fine, gloss-enhancing polish that creates a fantastic, mirror-like shine. This is the icing on the cake. For most daily drivers, this might be considered excessive. But if you have to have the cleanest, brightest, most brilliant shine possible, this is the polish you need. Apply it with a fluffy, Electrified White Sheepskin Final Polishing Pad at a speed of 1000 RPM (4 on a dual action polisher). If using a PowerBall or Polishing Ball, work at 1000 RPM. Excellent results can also be achieved by hand polishing with a soft, clean microfiber cloth.

How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (4)
There’s nothing like the gleam of just-polished metal and we’ll tell you how to get it.
How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (5)
Use a 4 Ply Twisted Compounding Pad with your rotary to work in the compound.
How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (6)
Spread the polish on the surface
before turning on the polisher.
How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (7)
Polish between 1200-1500 RPM
(or 5-6 OPM on a dual action polisher)
How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (8)
Polish until your surface appears to be clean and glossy. It may take several passes to completely remove the oxidation.
How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (9)
Wipe the surface clean. Repeat the process if stains or oxidation are still present.

If you’re using Wolfgang MetallWerk™ Aluminum Compound on wheels, use Mothers PowerBall Mini or Flitz Polishing Ball at 3000 RPM on your electric drill.

How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (10)

Anodized Aluminum

Anodized Aluminum is a unique material in that it’s meant to be oxidized. Remember when I said aluminum oxidizes as a defense mechanism against deeper corrosion? Anodizing increases the thickness of the aluminum oxide layer to strengthen the underlying aluminum’s natural resistance to corrosion. The resulting finish is very porous and is therefore usually sealed or dyed. That’s why many metal polishes cannot be used on anodized aluminum. Flitz Metal Polish, Fiberglass & Paint Restorer is one of the few that can be used with excellent results.

Chrome

Chrome is actually a plated metal. Chromium, the metal used in chrome-plating, is highly resistant to tarnish and retains a reflective shine better than any other metal. However, chrome will rust without regular maintenance. The best way to keep small rust spots from becoming a big problem is to remove them ASAP. The sooner you catch the damage and correct it, the better your chances are of saving the chrome.

There are a lot of great products on the market for cleaning and polishing chrome. If the chrome has heavy oxidation, calcium or lime scale, or green tarnish, use Flitz Industrial Strength Aluminum PreClean first. Despite its name, it can safely be used to clean chrome. This product is an intense cleaner that removes the bulk of the oxidation so the metal polish can get to the source of the problem. It saves you elbow grease and gets you results faster. Spray it on, wait 7-10 minutes, use a sturdy nylon brush to gently scrub the metal, and then rinse well. Quick, easy, and effective.

Next, use a metal polish that states on the label that it is safe on chrome. Flitz Metal Polish, Fiberglass & Paint Restorer is a very safe but very effective metal polish. It removes rust, tar, water spots, and bugs on all types of metal, plastic, and painted surfaces. The application will be the same for most metal polishes: wipe it on with a soft cloth, rub briskly (not hard), and buff off with a clean cloth.

How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (11)Hand polishing can be tedious. If you have an electric drill, you will save yourself a lot of work by using Mothers PowerBall Mini or Flitz Polishing Ball. Both of these tools improve the performance of the metal polish by polishing faster than you can by hand. Wipe the polish onto the chrome with a cloth or applicator. Start your drill at a low speed and gradually increase it to 3000 RPM. Work until the polish starts to disappear. Stains and rust should be gone; if not, try again. Metal polishing isn’t always easy but the rewards are pure bliss to an auto enthusiast.

Flitz Metal Polish, Fiberglass & Paint Restorer leaves a clear, protective film on the chrome that resists fingerprints and oxidation. To touch up chrome between polishing sessions, use Flitz Stainless Steel & Chrome Cleaner. It’s similar to a quick detailer for metal. Just spray and wipe with a Cobra Microfiber Towel to remove fingerprints, smudges, fresh water spots, and bird droppings. This is a great product for last-minute touch-ups before a car show or a special occasion.

Stainless Steel

Stainless steel is another metal that is highly resistant to corrosion, staining, spotting, and rust. But, like anything else, maintenance is needed to keep it looking sharp.

Stainless steel is a very hard metal and consequently, it can be difficult to get a really spectacular shine like you can get on chrome and aluminum. But, with the right products and a little patience, you can get impressive results on stainless steel.

We recommend Wolfgang MetallWerk™ Fine Aluminum Polish. Though it says aluminum, it is safe and effective on stainless steel. The only noticeable difference is that it will not create a black residue as you polish, like it would on aluminum. If you’re polishing a large surface, you can use a wool pad on your polisher. Work at a speed of 1200-1500 RPM until you achieve the desired shine. If you’re polishing a small surface, like wheels or exhaust tips, a soft cloth will do the trick.

How to Polish Metal using Wolfgang Metal Polishes, Wenol chrome and aluminum polish, Flitz Metal Polish, how to polish diamond plating, how to polish (12)Another excellent metal polish is Wenol Red to polish out oxidation and stains on stainless steel. Use a small amount and rub briskly, not hard, until you see a nice shine appear. Again, Mothers PowerBall Mini or Flitz Polishing Ball comes in handy. Once you’re satisfied with the results, buff the stainless steel clean with a soft Cobra microfiber towel.

Use Flitz Stainless Steel & Chrome Cleaner for regular cleaning between polishes and after you wash your vehicle.

Sealing Metal

After polishing, you don’t want all your hard work to go to waste. Seal in the shine with Wolfang MetallWerk™ Concours Metal Sealant. This is an acrylic polymer sealant for all metals, coated and uncoated. This product is an absolute necessity for daily drivers! The crystal clear coating will block out contaminants and the elements to keep your polished metal surfaces looking like new. Apply it with a foam or microfiber applicator pad and allow it to dry completely. Buff off the residue with a clean, soft Cobra Microfiber Towel. If applying with a polisher, use a finishing pad and polish at a low speed until you've achieved an even coat. Buff to a high gloss.

LIKE ALWAYS GREAT CUSTOMER SERVICE, QUALITY PRODUCT, AND I USUALLY GET ITEM DELIVERED EARLIER THEN PROMISED!!! YOU WILL NOT FIND A BETTER COMPANY!!!

Christopher S.

FAQs

How do you use Wenol metal polish? ›

Use Instructions: Designed to be used sparingly, apply a small amount of Wenol evenly to the metal surface with a soft cloth. Polish vigorously (surface will turn black), then buff to a shine.

How do you use Flitz polish on chrome? ›

Rub the polish on evenly over the surface you wish to polish and let sit for a couple of minutes. 3. Slowly run the Flitz BuffBall into the openings of the Jeep wheel. The ball will get right into the small openings and conform to the shape and polish the wheel.

How do you make metal super shiny? ›

A mixture of salt, plain flour, and white vinegar can also help to make metal shiny. Apply it to the tarnished metal, leave for 1-2 hours, then remove.

What's the best thing to polish metal with? ›

Sandpaper Using an aluminum oxide or silicon carbide sandpaper, metal can be polished effectively. Ideally, it is best to start with 600-grit sandpaper and then then move on and up to finer sandpaper – up to 2500-grit.

What is the best polish for metal? ›

Restore the Appearance of Your Metal With the Best Metal Polishes
  • 1 Chemical Guys Metal Polish.
  • 2 Simple Shine Silver Cleaner.
  • 3 Blue Magic Metal Polish.
  • 4 Brasso Metal Polish.
  • 5 George Basch Metal Polish.
  • 6 Simichrome Metal Polish.

Does Flitz work on chrome? ›

Flitz is safe on Chrome.

What should you not clean chrome with? ›

Plain old dish soap. Fill the sink with warm water, add a few drops of mild dish soap. Use one microfiber cloth to clean, followed by a dry one to polish. Remember: Chrome is a soft metal, so always avoid abrasive cleaners, scrub pads or stiff-bristled brushes, which can cause damage.

Can you use vinegar on polished chrome? ›

Using vinegar as a chrome cleaner is a great way to remove tarnish and mineral deposits from chrome surfaces. A small amount of vinegar can tackle tough stains on showerheads, towel bars, faucets, hinges, chrome trim, bumpers, pans — whatever chrome surface needs a good cleaning in your home.

What is the best speed for polishing aluminum? ›

Once a buffing wheel is loaded onto this buffer you will get an industry standard 6,000 rpm's. Most professional polishers run their cut stage (Orange wheel/tripoli bar) AND their color stage (Yellow Airway / Green Rouge) using this fixed speed of 6,000 RPM's.

What do you put on aluminum after polishing? ›

To keep your aluminum looking nice, you can use a sealant, a wax, or an anodizing process to protect the shine of your metal.

What grit do I need to polish aluminum? ›

Many professionals recommend going from 320 grit, to 400 grit, and finish with 600. The real detail oriented polishers will sometimes go to 800 or even 1500 grit before moving onto the next step.

How do you polish metal to a mirror finish? ›

Buffing and Polishing Metal

Eventually you'll be using sandpaper somewhere around 2,000 to 4,000 grit sandpaper. Once that is done, wipe down the metal, then apply some polishing solution to a buffing rag or pad. With medium pressure, buff the metal.

How do you make old metal look new? ›

Pour white or apple cider vinegar that is 5% acidity into the sink with the fixtures. Put some ketchup in with the vinegar. Let the fixtures soak for a few hours. Wearing gloves, take each fixture and put some extra ketchup on them and scrub them using an old tooth brush.

How do I make steel shine like chrome? ›

Just spray the surface and then wipe it down with a paper towel or a lint-free towel. What is this? Once that's done and the surface is completely dry, you want to put olive oil on a soft lint-free cloth and rub the oil into the appliance going against the grain. Just keep buffing it until it shines.

Which is the simplest way to polish a metal? ›

The simplest way to polish a metal is to apply the abrasive material to the metal surface by hand. However, this is generally not an efficient solution for large scale polishing operations and can cause a lack of quality and consistency.

Can you use wd40 to polish metal? ›

When you've gotten your steel or brass cleaner, you can apply the final touches by spraying on some WD-40. After a few minutes, you can buff the material out to let it shine.

What is the best solvent to clean metal? ›

Acetone is well known as one of the safest solvents to use for cleaning metal. Acetone is often used to clean metal in industrial applications to remove debris and build-up from machinery, as well as 3D printers, and in applications to clean metals before applying paint and other coatings.

Can you use vinegar to shine metal? ›

It doesn't matter what type of vinegar is as long as it's colourless. The acid in the vinegar will help get the tarnish right off. Dab a cloth in it and wipe. Just remember to use clean parts of the cloth for different areas.

How do you polish aluminum to a mirror finish? ›

How To Polish Aluminum
  1. Step 1: Clean The Aluminum. A coarse grit sandpaper can be used to remove heavy amounts of corrosion and dirt, and acts to level the surface of the aluminum. ...
  2. Step 2: Sand The Aluminum. If you are hoping to accomplish a mirror-like finish, sanding is key. ...
  3. Step 3: Buff The Aluminum.
17 May 2022

Is Flitz polish abrasive? ›

Cleaning the Bore of Your Gun

This product contains no ammonia, and is non-abrasive and non-flammable. Flitz Bore Cleaner will remove: Copper build up.

How long does Flitz polish last? ›

No drying time is required, and Flitz guarantees up to 1 year of protection with a single application.

Does Flitz really work? ›

I've used Flitz to shine up so many things, its really a multipurpose paste. A very small amount will shine and buff up jewelry (but will leave behind a black debris that you simply rinse off) and I've used it to clean up my cooktop and it removes the surface scratches.

What's the best chrome polish on the market? ›

Our pick for the best chrome polish is the 3M Chrome and Metal Polish. We like this option because of its versatility. You can also use it on steel, copper, brass, and other metals. The formula removes rust, oxidation, pitting, and spots on your chrome components.

How do I make chrome look new? ›

Method
  1. Wipe down the surface. Remove any loose dirt or dust by wiping down your chrome surface with a cloth or rag.
  2. Create a cleaning solution. Fill your sink two thirds of the way with warm water and add a few squirts of washing up liquid, until you have a nice bubbly mixture.
  3. Wash the chrome. ...
  4. Dry immediately.
6 Nov 2020

How do I bring chrome back to life? ›

Here's a clear, step by step how-to guide.
  1. Isolate the chrome part.
  2. Scrape off the rust.
  3. Treat the metal.
  4. Clean the chrome.
  5. Treat the rust.
  6. Let the metal polish dry.
  7. Buff it off.
  8. Polish the chrome.
13 Feb 2019

Is wd40 good for cleaning chrome? ›

WD-40 Multi-Use Product shines and polishes chrome. WD-40 Multi-Use Product protects all kinds of metal from rust and corrosion. WD-40 Multi-Use Product removes gunk from vehicles.

How do you clean chrome without scratching it? ›

How to Clean Chrome With Dishwashing Liquid
  1. Prepare a Cleaning Solution. Add one teaspoon of dishwashing liquid to a sink or bucket of warm water. ...
  2. Wipe Down the Chrome. Dip a nonabrasive sponge or soft cloth in the cleaning solution. ...
  3. Rinse the Chrome and Buff Dry.
21 Jun 2022

Can you use baking soda to clean chrome? ›

Baking soda is an extremely gentle scouring powder that will not scratch your chrome. So it's perfect when your chrome fixtures are grimy or stained.

What's the best thing to clean chrome on a car? ›

Another option is to pour some vinegar on a rag and wipe any dirt or dust from the metal. If there are any stubborn spots, put some baking soda on the vinegar-soaked rag and then wipe the chrome with it. This should take care of most dirty spots you see on the metal on your car.

What is the best speed for polishing? ›

Utilize this same principle when selecting the right compound or polish. Lower RPMs means less friction, less friction means less heat buildup. Try to stay between 1750-2400 RPM when compounding and between 1200-1750 RPM when finishing.

What is the difference between chrome and polished aluminum? ›

What's the difference between 'Chrome Plated' and 'Polished Aluminum' finishes? Chrome Plating is a hard metal coating that is electrochemically deposited on the surface of the wheel. Chromed wheels may be buffed to a mirror shine. Polished Aluminum is the bare metal surface of the alloy wheel buffed to a high shine.

How do you keep aluminum shiny after polishing? ›

Restore the Color and Luster of Faded, Anodized or Painted Aluminum
  1. For architectural , painted or anodized aluminum, use Everbrite Coating.
  2. For automotive, marine, and highly polished aluminum, use ProtectaClear.
  3. For aluminum that needs antimicrobial protection like railings, use CrobialCoat.

Do you have to sand aluminum before polishing? ›

Not every piece requires sanding before polishing. Again, it depends upon where you want the piece to end up. Now that it's clean, take a good look at your aluminum piece to see how smooth the surface is. For things like cookware, boat or car trim, even care wheels, sanding may not be necessary.

How do you get a good finish on aluminium? ›

Mechanical finishes – Aluminum and aluminum alloys can be buffed, polished, blasted, sanded, or grinded. This is typically done in order to improve the surface quality of the extrusion in order to prepare it for further cosmetic finishes.

What grit should you sand to before polishing? ›

It is recommended that you sand your metal surfaces to 600 grit or 400 grit (320 grit at the very least) before polishing.

How do you polish aluminum without scratching it? ›

Here's what you need to do:
  1. Put on a pair of kitchen gloves (to avoid getting fingerprints on the surface).
  2. Apply cream of tartar to a soft cloth; just enough to polish small areas at a time.
  3. Polish in circular motions for best results.
  4. Finish off by buffing the aluminium with a flannel cloth.
1 Dec 2019

How do you polish aluminum without dull? ›

You never have to fuss with messy liquids or powders—just tear off a piece of the specially-treated cotton wadding, rub the surface, and then buff with a dry cloth. Nevr-Dull polish will not scratch or corrode and leaves no residue behind. Just tear off a piece and polish away!

How do you make old metal look good? ›

Place silver in a freezer bag with the yolk of a hard-boiled egg to achieve a rich patina. Soak copper in a solution of water and rapid fixer to age the metal. Or, for a blue-green patina, soak it in a mixture of water, vinegar, and salt. Lightly ding cast iron with a hammer, or run sandpaper across the surface.

How do you clean old oxidized metal? ›

Cleaning
  1. Rinse the furniture and dust with baking soda. Leave for an hour, the scour with steel wool or a metal brush. ...
  2. Soak your furniture in vinegar overnight, scrape with steel wool or metal brush.
  3. Use salt and lemon, dust over the affected area and squeeze lemon over it. Leave for a couple of hours then scrub off.
23 Dec 2020

How do you prepare metal for chrome? ›

Parts must be stripped and or sandblasted down to the bare metal. All paint, dirt, oil, grease, rust, old plating, and other materials are removed. Lead & brass may be used to fill holes & cracks while damaged parts may be straightened or have dents removed.

How do you buff out scratches on stainless steel? ›

Non-gel toothpaste can be used as-is, and baking soda can be mixed with water until a pasty consistency is reached. Make sure the surface is completely clean of dirt, dust, and food particles. Then dab a small amount of the compound onto a microfiber cloth and rub it continuously over the scratch.

How do you apply metal polish compound? ›

Apply polishing compound sparingly to the face of a revolving buffing wheel. Repeat application of compound as needed during the buffing and polishing operations. Use only slight pressure in applying the revolving buff to the work surface, thereby allowing the buffing wheel and the polishing compound to do the work.

How does metal polish work? ›

The Metal Polishing is an aggressive process that removes oxidation and creates a reflective surface but also adds protection from corrosion and contamination. Most commonly used in stainless items, with #4 180 grit being the most popular.

How do you smooth and polish metal? ›

Buffing and Polishing Metal

Eventually you'll be using sandpaper somewhere around 2,000 to 4,000 grit sandpaper. Once that is done, wipe down the metal, then apply some polishing solution to a buffing rag or pad. With medium pressure, buff the metal.

Do you use rubbing compound before polish? ›

The polishing compound out of rubbing compound vs polish helps in making the paint color pop out and shine. Thus, the polishing compounds are used after the use of the rubbing compound on the paint.

Do you use water with polishing compound? ›

YES! It is better to use water to polish concrete ”“ for a number of reasons: 1. Using water lubricates the cutting surface and reduces friction & heat of the diamond pads.

What goes first compound or polish? ›

A compound agent is a liquid that is applied with a buffing or polishing machine. It acts like sandpaper to gradually remove surface layers and eliminate scratches. After compounding, polish is used to remove any remaining defects.

How long should polish sit before buffing? ›

You can leave the polish on the shoe for anywhere between 20 minutes to overnight. The more time that the natural ingredients have to work into the leather and nourish it, the better.

What are the 3 stages of polishing? ›

3 STAGE DETAIL
  • stage – heavy defects removed by coarse abrasive compounds and pads.
  • stage – machine polishing with a medium-strong cut compound to eliminate surface defects applied by 1st stage.
  • stage – machine polishing, ultra-soft polish/compound this refining process produces a mirror reflection finish.

Should I wet sand before polishing? ›

Dry is going to be more aggressive, especially with lower grit sandpaper. This allows you to shape your workpiece or significantly grind down uneven surfaces to level them out. Wet sand paper is used in a later stage of the process to bring out a shine on the object or to prep for buffing and polishing.

How can I make my metal shine like chrome? ›

Just spray the surface and then wipe it down with a paper towel or a lint-free towel. What is this? Once that's done and the surface is completely dry, you want to put olive oil on a soft lint-free cloth and rub the oil into the appliance going against the grain. Just keep buffing it until it shines.

How do you polish aluminum to mirror finish? ›

How To Polish Aluminum
  1. Step 1: Clean The Aluminum. A coarse grit sandpaper can be used to remove heavy amounts of corrosion and dirt, and acts to level the surface of the aluminum. ...
  2. Step 2: Sand The Aluminum. If you are hoping to accomplish a mirror-like finish, sanding is key. ...
  3. Step 3: Buff The Aluminum.
17 May 2022

How do you protect metal after polishing? ›

Here's how you can prevent damage to polished aluminum surfaces.
  1. Coat the Polished Surface. After you've polished away the superficial scratches and removed all signs of corrosion, you need to make sure the same thing doesn't happen again. ...
  2. Make Sure It Stays Clean. ...
  3. Keep the Moisture Out. ...
  4. Park Indoors.
24 Sept 2021

Top Articles
Latest Posts
Article information

Author: Laurine Ryan

Last Updated: 01/16/2023

Views: 6211

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Laurine Ryan

Birthday: 1994-12-23

Address: Suite 751 871 Lissette Throughway, West Kittie, NH 41603

Phone: +2366831109631

Job: Sales Producer

Hobby: Creative writing, Motor sports, Do it yourself, Skateboarding, Coffee roasting, Calligraphy, Stand-up comedy

Introduction: My name is Laurine Ryan, I am a adorable, fair, graceful, spotless, gorgeous, homely, cooperative person who loves writing and wants to share my knowledge and understanding with you.